Simplify and organize your wiring with the Direct-Connect Sensor Wire!
With the Direct-Connect Sensor Wire, there's no need for the Castle sensor harness adapter, eliminating an unnecessary connection point and providing a cleaner installation.
One end of the wire features the standard ROAR sensor plug, which easily connects to the back of any sensored motor. The other end plugs directly into any waterproof, sensored-capable Castle ESC, streamlining your wiring setup.
The Direct-Connect Sensor Wire is compatible with the following ESCs:
• Mamba Micro X
• Mamba Micro X2
• Mamba X
• Mamba Monster X
• Mamba Monster X 8s
• Mamba XLX2
• Copperhead 10
Choose from available lengths:
• 200mm (7.9")
• 250mm (9.8")
• 300mm (11.8")
Motor Installation:
Plug new direct connect sensor wire into the back of the motor. The plug is keyed so it will only insert correctly one way.
Mamba Micro X Installation:
1. Unplug existing sensor harness (or dust cover) from ESC.
2. Plug in new direct connect sensor wire; mind the orientation by aligning the white wire to the corresponding whit dot on the side of the ESC.
Mamba X Installation:
1. Remove 2 screws beside capacitors, using 1.5mm hex.
2. Remove wire harness retainer.
3. Unplug existing sensor harness from ESC.
4. Plug in new direct connect sensor wire; mind the orientation by aligning the white wire to the corresponding whit dot on the side of the ESC.
5. Reinstall wire harness retainer and screws.
Experience the convenience and cleanliness of the Direct-Connect Sensor Wire, and enjoy a more organized and efficient installation. No more unnecessary adapters or messy wiring. Simplify your setup with Castle Creations' Direct-Connect Sensor Wire.
